Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 163)

Survey Pro Reference Manual
R-6
Note: You can enter a distance in any distance field in units other
than what is set for the job by appending the distance value with the
following characters:
y
f or ft Feet
y
usf or usft US Survey Feet
y
i or in Inches
y
m Meters
y
cm Centimeters
y
mm Millimeters
y
c or ch Chains
Once the cursor leaves that field, the distance will be converted
automatically. (A space between the value and the unit abbreviation
is optional.)
Units for Angles : specifies if angles will be entered in Degrees or
Grads .
;
Adjust for Earth Curvature / Refraction : When checked, the
elevations recorded from all shots will be adjusted to compensate for
earth curvature and refraction.
;
User Scale Factor : When checked, all horizontal distances when
taking shots will be adjusted by the scale factor entered here.
1H[W ! : accesses the third screen where coordinates for the first
point are defined and the job is saved.