Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 83)

Road Layout
77
6. Tap
2. to return to the New Template screen where the new
curb segment will appear.
7. With <End> selected, tap
,QVHUW« and enter the following
data to add a sidewalk and then tap
2..
Segment Name: Sidewalk
Horizontal Dist: 4
Slope: 0
8. With <End> selected, tap
,QVHUW« and
enter the following data to add a ditch
and then tap
2..
Segment Name: Ditch
H. Offset: 2
Slope: -40
9. Tap
2. from the New Template
screen and the Save As dialog box
will open. Enter
T1 in the Name field
and tap
2.. This completes the
creation of a template.
Building an Alignment
The Edit Alignments routine is used to create an alignment and is
explained in detail starting on Page 41. If you do not currently have
any alignments stored on the data collector, either create a simple
alignment now that is at least 300 feet long, or follow the instructions
that start on Page 41 to create a new alignment that contains each
possible type of horizontal and vertical section.