Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 252)

Survey Menu
R-95
Resection
6XUYH\ 5HVHFWLRQ 
The Resection screen allows you to compute an unknown occupied
position by shooting two to seven known positions.
Store Point : is the name that will be used when
the new occupied point is stored.
Instrument Height : is the height of the
instrument above the ground.
Total Resect Points to Shoot : is the number of
known positions that will be shot, from 2 to 7.
Shots per Resect Point : is the required number
of shots to shoot to each foresight when Direct
Only is selected in the next field and is the
required number of sets when Direct and
Reverse is selected in the next field.
Sequence : is the set order when shooting each foresight. You can
select either Direct and Reverse or Direct Only .
6ROYH« : accesses the Resection dialog box, described below, where
all of the shots are performed.
Resection Dialog Box
Resect Point : is the known point that you will
shoot.
Option : allows you to select the type of data that
is recorded when shooting the specified
foresight. You can select
Distance and Angle , or if
shooting at least three foresights, you can also
select to record the
Angle Only .
HR : is the length of the rod.
7DNH 6KRW« : takes a shot to the prism at the
specified foresight point. After the last shot is