Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 260)

Survey Menu
R-103
Remote Control
6XUYH\ 5HPRWH &RQWURO 
or
Ctrl
-[Y]
Remote control mode is a special mode that makes it easier for users
to control fully robotic total stations from a remote data collector.
Note: The remote control functions are available only after a
supported robotic total station is selected and enabled in the
Instrument Settings screen.
Remote Control
The Remote Control screen allows you to turn the total station in any
direction using the arrow buttons on the keypad and control the
tacking functions.
The arrow keys are typically used to get the total station to aim in the
general vicinity of the prism prior to initiating a search. The total
station will continue to turn in the direction of the button as long as
the button remains pressed.
Ï
: aims the scope upward.
Ð : aims the scope downward.
Î : turns the scope to the right (as you face
the total station from the data collector).
Í : turns the scope to the left.
6HDUFK : starts the search routine where the
total station searches in a specific pattern until
it “sees” the prism and then stops.
/RFN : puts the total station in track mode
where it will track the movements of the prism.
6WRS : stops the total station from tracking or searching.