Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 84)

User’s Manual
78
Putting the Road Together
The final step in creating a road that can be point staked or slope
staked is to use the Add/Edit Roads routine to combine the
template(s) with the alignment and define any widenings and super
elevations.
In this example, we will use only one template for the entire road.
We will use a widening to add a second lane to the right side of the
road and we will add four super elevation definitions to bank the left
and right side of a curve.
Add Templates to the Alignment
1. Tap
5RDGV (GLW 5RDGV to open the Add/Edit Roads screen.
2. Since we are creating a new road, tap
1HZ«
to open the New Road screen.
3. With the
5RDG tab selected, enter a name for
the road in the Road Name field. In this
example, we used Example .
4. Tap the
&KRRVH $OLJQPHQW« button and
select an alignment. In this example, we
selected the
Roadway alignment created on
Page 41. Tap
2. to continue.
5. Tap the
6HW 32%« to open the Road
Alignment Properties screen to define where the road begins in
the job.