Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 151)

Screen Examples
145
Note: if closing to a known location and a closing location is not
specified, it is automatically assumed that the first point of the
traverse will be the closing location.
8. Tap
1H[W ! to open the final screen of the adjustment
wizard, which displays the changes that will be made by
the adjustment where they can be previewed before the
actual adjustment is applied.
The screen lists the adjustment details in three main
sections: the angle adjustment details; the compass rule
adjustment details, and the point details where the before-
and-after coordinates for each point are listed. An example
of the information provided in this screen is shown here.
9. If you are satisfied with the changes that will be made by
the adjustment routine, tap
$GMXVW to perform the
adjustment.