Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 323)

Survey Pro Reference Manual
R-166
Note: Leaving the Store Pts field unchecked and solving the screen
will result in a map screen that displays the points that would be
stored, but without actually storing anything to the job. This is
useful for testing the routine before storing information.
;
Store Nodes : When checked, computes offset points that
correspond to each node in the selected alignment (points where the
horizontal or vertical alignment change), or that correspond to the
existing points in a selected line or point range.
;
Sta. Intervals : When checked, computes offset points from the
beginning of the selected line or point range, and at each specified
station interval along the line or point range.
Description : is the description that will be assigned to all points that
are stored.
6ROYH : computes the offset points, and stores them if the
Store Pts
checkbox is checked.