Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 364)

Roads Menu
R-207
The Road Card
5RDGV (GLW 5RDGV ( 1HZ« or (GLW« ) 5RDG 
The Road card of the New Road screen is used to select the alignment
to use for the road. If an alignment has not yet been created, refer to
Page R-48 for information on creating an alignment.
Road Name : is the name assigned to the road.
The name must not be the same as any existing
road name.
Alignment Description : displays the name of
the selected alignment.
&KRRVH $OLJQPHQW : opens the Choose
Alignment screen where an existing alignment
can be selected.
&KHFN : checks the road for errors and displays
the results in the Roads Report screen.
9LHZ 3URILOHV : opens the Road Profiles screen where you can see
information about the cross-sectional profile of the road at any
station.
6HW 32%« : opens the Road Alignment Properties screen where
information about the current alignment can be changed.
Roads Report Screen
5RDGV (GLW 5RDGV ( 1HZ« or (GLW« ) 5RDG &KHFN« 
The Roads Report screen displays a list of any errors after performing
the following tests.
• Confirm that the alignment contains both a HAL and a VAL.
• Confirm that the horizontal length of the VAL is greater than
or equal to the HAL.
• Confirm there is at least one template for each side of the
road.