Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 250)

Survey Menu
R-93
Shoot From Two Ends
6XUYH\ 6KRRW )URP  (QGV 
The Shoot From 2 Ends screen is used to provide more accurate
vertical closure to a traverse. The routine requires that a foresight
point is shot, but it is not stored until after it is occupied and another
shot is taken to the previous occupy point. The coordinates for the
foresight point are computed from an average of data gathered at
each occupy point.
6HWWLQJV : located at the top of the screen, is a
shortcut to the Surveying and Repetition
Settings screens (Page R-32 and R-35
respectively).
Foresight : is the name given to the next stored
point.
Description : is the description given to the next
stored point.
HR : is the length of the rod.
Number of Sets : is the desired number of sets
required when shooting each foresight. You must select at least one
set.
7UDYHUVH : will prompt you to shoot the
Foresight
point. After each set is performed, the Move To Other
End dialog box will open (shown here) and prompt you
to set up on the new point and enter a new instrument
and rod height. The New Occupy Point dialog box
(Page R-77) will open and inform you of the updated
points.
%6 6HWXS« : accesses the Backsight Setup screen
(Page R-72) where the current backsight can be modified.