Spectra Precision Survey Pro CE v3.6 User Manual - Manual (Page 244)

Survey Menu
R-87
Auto Collect – Screen Two
The second Auto Collect screen displays information related to the
points that have been stored and when the next point will be stored.
The box in the upper-left corner displays the
direction and distance the total station is aiming
relative to the backsight.
The upper-right corner displays the next store
point number and when the next point will be
stored in either seconds or distance.
The lower-left corner is a graphic that shows the
current total station position, the current prism
position, and when collecting by distance, the
approximate location of the next store point
(represented by an
X ) based on the speed and
direction the prism is moving from the previous store point. Previous
stored points are also displayed as dots in this part of the screen.
The lower-right corner of the screen displays the number of points
that have been stored and the speed and direction the prism is
traveling.
6WRUH 1RZ : stores a point at the current prism location, even if the
time / distance criteria is not yet met.
%DFN : returns to the previous Auto Collect screen.
6WDUW / 6WRS : toggles between starting or stopping the Auto Collect
routine.