West Control Solutions MRC 9000 - Manual (Page 128)

Section 4 Edition 3
Rev G 4-46
If selection was NO, proceed to step 3.
If selection was YES:
3. Press the to advance to the next parameter, RECORDER TAG.
Refer to Section 3.4.2 Changing Text, page 3-3 for
instructions.
R
E
C
O
R
D
E
R
S
Rx RECORDER TAG
Selections
Text
Rs COPY FROM RECRDER
(0 = INITIALIZE) X
Recorder to be copied from
0 = FACTORY DEFAULT
Press the to change to the recorder
number to be copied from.