West Control Solutions MRC 9000 - Manual (Page 156)

Section 4 Edition 3
Rev G 4-74
4.1.12 INSTRUMENT SETTINGS
Instrument Settings define instrument tag, display option and date/time format.
From the Normal Display, press the until CONFIGURATION is seen in the lower display line. If PASS-
WORD appears in the lower display line, the correct "password" will need to be entered before access to Configu-
ration is allowed. If CONFIGURATION is not displayed, then Configuration has been disabled. Refer to Section
9, Enables and Passwords, for instructions to enable Configuration.
With CONFIGURATION in the display, press the , then the until INSTRUMENT SETTINGS appears
in the lower display line.
1. Press the to display INSTRUMENT TAG.
2. Press the to advance to the next parameters, DISPLAY OPTION.
I
N
S
T
R
U
M
E
N
T
S
E
T
T
I
N
G
S
Refer to Section 3.4.2 Changing Text, page 3-3 for
instructions.
DISPLAY OPTION
IN SEQUENTIAL MODE
Selections
NOT DISPLAYED
IN CONTINUOUS MODE
IN SEQUENTIAL MODE
IN BOTH MODES
Press the to change, then to
desired choice, then press the .
INSTRUMENT TAG
RECORDER #1
Selections
Text