Timer number 1, Tmx display tag timer x – West Control Solutions MRC 9000 User Manual
Page 145
Edition 3
Rev G
Section 4
4-63
4.1.8 TIMERS
Timers are seen only if the MATH option was specified and present in the model number order matrix.
From the Normal Display, press the
until CONFIGURATION is seen in the lower display line. If PASS-
WORD appears in the lower display line, the correct "password" will need to be entered before access to Configu-
ration is allowed. If CONFIGURATION is not displayed, then Configuration has been disabled. Refer to Section 9,
Enables and Passwords, for instructions to enable Configuration.
With CONFIGURATION in the display, press the
, then the
until TIMERS appears in the lower display
line.
1. Press the
to display TIMER NUMBER.
2. Press the
to advance to the next parameter, DISPLAY TAG.
TIMER NUMBER
1
Selections
1 to 4
Press the
to change, then
to
desired number, then press the
.
Refer to Section 3.4.2 Changing Text, page 3-3 for
instructions.
TMx DISPLAY TAG
TIMER X
Selections
Text
T
I
M
E
R
S