Cx integration band 100 units, Cx integration shift 0 units – West Control Solutions MRC 9000 User Manual
Page 266
Edition 3
Rev G
Section 13
13-35
8. Press the
to advance to the next parameter, INTEGRATION BAND (only if proportional output).
Cx INTEGRATION BAND
100 units
Note: Units correspond to Units
configured in Process Variables.
Selections
0 to 999999
(decimal position=0)
0 to 9.9999
(decimal position=4)
INTEGRATION BAND sets the range where integration of the error will occur, centered on the control setpoint.
9. Press the
to advance to the next parameter, INTEGRATION SHIFT (only if proportional output).
Cx INTEGRATION SHIFT
0 units
Note: Units correspond to Units
configured in Process Variables.
Selections
0 to 999999
(decimal position=0)
0 to 9.9999
(decimal position=4)
INTEGRATION SHIFT represents a shift or offset for the integration band from its normal operating position,
centered on the control setpoint.
Press the
to change, then
or
to desired number, then press the
.
Press the
to change, then
or
to desired number, then press the
.