West Control Solutions MRC 9000 - Manual (Page 258)

Edition 3
Rev G
Section 13 13-27
13. Press the to advance to the next parameter, F3 OFF STATE TEXT (only seen if KEY USAGE selected
was CUSTOM).
CAx F3 OFF STATE TXT
SP1
Selections
TEXT
14. Press the to advance to the next parameter, F3 ON STATE TEXT (only seen if KEY USAGE selected
was CUSTOM).
CAx F3 ON STATE TEXT
SP2
Selections
TEXT
15. Press the to advance to the next parameter, F4 KEY USAGE.
CAx F4 KEY USAGE
NOT USED
Selections
NOT USED
C1 AUTO/MANUAL
C2 AUTO/MANUAL
C3 AUTO/MANUAL
C4 AUTO/MANUAL
LOCAL/REMOTE
SP1/SP2
CUSTOM
Refer to Section 3.4.2, Changing Text,
for instructions .
Refer to Section 3.4.2, Changing Text,
for instructions .
Press the to change, then or
to desired choice, then press the .