Agilent Technologies 75000 Series C - Manual (Page 123)

Chapter 5
Service
Introduction
This chapter contains service information for the Agilent E1445A AFG,
including troubleshooting guidelines and repair/maintenance guidelines.
WARNING
Do not perform any of the service procedures shown unless
you are a qualified, service-trained technician, and have read
the WARNINGS and CAUTIONS in Chapter 1.
Equipment
Required
Equipment required for AFG troubleshooting and repair is listed in Table
1-1, Recommended Test Equipment. Any equipment that satisfies the
requirements given in the table may be substituted. To avoid damage to the
screw head slots, use T8 and T10 Torx drivers as described in the
disassembly instructions later in this chapter.
Service Aids
See Chapter 4 for descriptions and locations of Agilent E1445A replaceable
parts. Service notes, manual updates, and service literature for the AFG
may be available through Agilent. For information, contact your nearest
Agilent Sales and Support Office.
Agilent E1445A Service Manual Service 121