Agilent Technologies 75000 Series C - Manual (Page 79)

Table 2-11. Performance Test Record for the Agilent E1445A (Page 3 of 7)
Model _____________________________ Report No. ____________________________ Date _______________
Test
Description* Minimum
Measured
Reading Maximum
Meas
Uncert TAR
Test 2-1. DC Zeros Test (Values in Vdc)
No Filter:
10.2375V (0 dB atten)
9.1347V (.99 dB atten)
9.1241V (1 dB atten)
8.1319V (2 dB atten)
6.4594V (4 dB atten)
4.0756V (8 dB atten)
2.2918V (13 dB atten)
2.0426V (14 dB atten)
0.3238V (30 dB atten) -0.022
-0.022
-0.022
-0.022
-0.022
-0.022
-0.022
-0.0044
-0.0044 ____________
____________
____________
____________
____________
____________
____________
____________
____________ 0.022
0.022
0.022
0.022
0.022
0.022
0.022
0.0044
0.0044 1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6 >10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
250 kHz Filter:
10.2375V (0 dB atten)
9.1347V (.99 dB atten)
9.1241V (1 dB atten)
8.1319V (2 dB atten)
6.4594V (4 dB atten)
4.0756V (8 dB atten)
2.2918V (13 dB atten)
2.0426V (14 dB atten)
0.3238V (30 dB atten) -0.022
-0.022
-0.022
-0.022
-0.022
-0.022
-0.022
-0.0044
-0.0044 ____________
____________
____________
____________
____________
____________
____________
____________
____________ 0.022
0.022
0.022
0.022
0.022
0.022
0.022
0.0044
0.0044 1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6 >10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
10 MHz Filter:
10.2375V (0 dB atten)
9.1347V (.99 dB atten)
9.1241V (1 dB atten)
8.1319V (2 dB atten)
6.4594V (4 dB atten)
4.0756V (8 dB atten)
2.2918V (13 dB atten)
2.0426V (14 dB atten)
0.3238V (30 dB atten) -0.022
-0.022
-0.022
-0.022
-0.022
-0.022
-0.022
-0.0044
-0.0044 ____________
____________
____________
____________
____________
____________
____________
____________
____________ 0.022
0.022
0.022
0.022
0.022
0.022
0.022
0.0044
0.0044 1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6
1E-6 >10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
>10:1
* Since the arbitrary waveform consists of zeros, the expected reading is 0 V, regardless of the amplitude
setting. The amplitude is changed in order to turn the various attenuators on and off.
Agilent E1445A Service Manual Verification Tests 77