Rockwell Automation 1333 Drive, 3/4-5HP, 230-575V Series D - Manual (Page 45)

Operation and Programming
Chapter 5
5-2
The Main
Display
Hz LED
Alternate
LED
The Enter
Pushbutton
The Stop
Pushbutton
The Shift
Pushbutton
The
Decrement
Pushbutton
The
Increment
Pushbutton
The Mode
Display
The Lock
Switch
The Directional Start
Pushbutons
The Select
Pushbutton
The Controls
Figure 5Ć2 -- Bulletin 1333 Series D Controls
The Select Pushbutton
In the Programming Mode is used to toggle between the parameter number
and the parameter value.
In the Monitoring and Operating Mode is used to select the mode to be
monitored.
•
Drive parameters.
•
Drive output frequency.
•
One of three alternate running displays.
The Lock Switch is used to switch between the Programming Mode and the
Monitoring Mode.