Reverse enable – Rockwell Automation 1333 Drive, 3/4-5HP, 230-575V Series D User Manual
Page 60
Advertising
Operation and Programming
Chapter 5
5-17
Reverse Enable
Parameter
10
-- Reverse Lockout
Units
= Off/On
Range
= 0/1
Factory Setting = 0
This parameter enables or disables both local and remote drive direction
control.
If set to 0, both local and remote direction control is enabled and motor
rotation can be selected in either direction.
If set to 1, both local and remote direction control is locked out and motor
rotation in only one direction can be selected.
Advertising