Rockwell Automation 1333 Drive, 3/4-5HP, 230-575V Series D - Manual (Page 65)

Operation and Programming
Chapter 5
5-22
Accel and Decel Hold Enable
Important: If the Heavy Duty Dynamic Brake option is installed, decel
frequency hold must be disabled by setting Parameter 18 to 0.
Accel and Decel Hold Enable
➊ Drive output current = 140% of rated output current.
➋ Drive output current below 140% of rated output current.
0
Initial Frequency
n o it a r e l e c c A
Time
Command Frequency
➊➋
Parameter 17 = 1
➊➋
➊➋
0
Command Frequency
Time
Initial Frequency
➋ ➊
Dece
leratio
n
Parameter 18 = 1
➊ Drive bus voltage = bus overvoltage trip.
➋ Drive bus voltage below bus overvoltage trip.
➋ ➊
➋ ➊