Rockwell Automation 1333 Drive, 3/4-5HP, 230-575V Series D - Manual (Page 46)

Operation and Programming
Chapter 5
5-3
The Directional Start Pushbuttons
In the Programming Mode are not functional.
In the Monitoring and Operating Mode are used to start or jog the drive
whenever drive speed is controlled from the Local Control Panel.
The Increment and Decrement Pushbuttons
In the Programming Mode are used to select parameters or increase and
decrease parameter values.
In the Monitoring and Operating Mode are used to increment or decrement
drive speed whenever drive speed is controlled from the Local Control
Panel.
The Shift Pushbutton
In the Programming Mode is used to shift between display segments in both
the Main and Mode Displays.
In the Monitoring and Operating Mode is used to shift between segments in
the Main display, or between jog and run in the Mode display when the
drive is stopped.
The Stop Pushbutton
In the Programming Mode is not functional.
In the Monitoring and Operating Mode will always stop the drive as
described in The Displays section that follows.
The Enter Pushbutton
In the Programming Mode is used to enter the parameter value.
In the Monitoring and Operating Mode is used to enter changes.
•
Enter changes in drive speed whenever drive speed is controlled from
the Local Control Panel.
•
Enter adjustment values to calibrate a 0-1 mA or 0-10V DC analog
output meter.