Rockwell Automation 1333 Drive, 3/4-5HP, 230-575V Series D - Manual (Page 8)

1
Chapter
1-1
PreĆInstallation Care
Before installing and operating your 1333 Series D drive, carefully read
this manual and observe all precautions. The catalog number of your drive
as explained in Chapter 2 — Drive Identification lists the drive rating, type
of enclosure, nominal line voltage, phase and frequency. Specifications for
all drives including standard controls, adjustment range, diagnostics and
environmental qualifications are listed in Chapter 3 — Specifications.
Receiving
Once you have received your drive, careful inspection for shipping damage
must be made. Damage to the shipping carton is usually a good indication
that it has received improper handling. Any and all damage should be
immediately reported to the freight carrier and your nearest Allen-Bradley
Area Sales/Support Center.
Carefully unpack the drive, taking care to save the shipping carton and any
packing material should return be necessary. Verify that the items on the
packing list or bill of lading agree with your order.
Storage
If the drive will not immediately be installed, it should be stored in a clean,
dry area where the ambient temperature is not less than -25
°
C nor more
than +65
°
C. The drive must not be stored in a corrosive environment nor
subject to conditions in excess of the storage environment parameters
stated in Chapter 3 — Specifications.
Shipping
The carton and materials that came with your drive have been designed and
tested to provide reasonable protection against damage during transit.
Should the drive be shipped to another location, it is recommended that the
original shipping carton and packing material be used to protect the drive
from damage in transit.