Add the me_equipment_parameter file – Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 139
Advertising
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
139
FactoryTalk View ME Configuration
Chapter 5
Add the ME_Equipment_Parameter File
1.
Right-click Parameters within the Graphics
folder and select Add Component Into
Application.
2.
Navigate to the 04_Equipment_Status
folder within the toolkit’s files folder.
Your personal computer’s harddrive path is
C:\Program Files\RA_Simplification\
DMAT\B-Files\5-HMI\ME\HMI
Modules\04_Equipment_Status.
3.
Select the EquipmentStatus_Parameter.par
file.
4.
Click Open.
5.
Verify the ME_Equipment_Parameter file
appears under Parameters.
6.
Double-click ME_Equipment_Parameter to
open the parameter editor.
The EquipmentStatus_Parameter dialog box opens.
Advertising
This manual is related to the following products: