Download runtime file to panelview plus terminal – Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 153
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
153
System Commissioning
Chapter 6
Create Your FactoryTalk View Runtime Application File
Follow these steps to create a runtime file for downloading to a PanelView Plus terminal.
1.
From the Application menu, choose Create
Runtime Application.
The Create Runtime Application dialog box
opens.
2.
From the Save as type pull-down menu,
choose Runtime 5.10 Application (*.mer).
3.
Enter a File Name for the application.
For the Widg-O-matic application example,
the file name is WidgOmatic_HMI.mer.
4.
Click Save.
The Runtime application (*.mer) file is
created. This may take a few minutes.
Download Runtime File to PanelView Plus Terminal
1.
Open FactoryTalk View Studio Machine
Edition software.
2.
From the Tools menu, choose Transfer
Utility.
The Transfer Utility window opens.