Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 243)

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 243
Logix Designer Communication and Controller Configuration Appendix D
Browse the EtherNet/IP Network Devices
Follow these steps to verify that all your network devices are present in RSLinx Classic software.
1. Click the RSWho icon to view the EtherNet/IP
driver and devices on the network.
2. Verify that all your network devices are
detected.
In this example, there are five network devices. The network configuration for your specific application
will be different.