Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 345
Advertising
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
345
Controller, Network, and Device Configuration Without the DMAT Wizard
Appendix G
Import and Configure Kinetix 300 EtherNet/IP Motion Drive Modules
Follow these steps to add preconfigured Kinetix 300 EtherNet/IP motion drive device logic modules to your
Logix Designer project.
1.
Expand the Tasks folder in your Controller Organizer and right-click the Main Task folder.
2.
Choose Import Program.
3.
Navigate to the 4-Controller Logic folder within the toolkit’s files folder and open the 03_Device Modules
folder.
Your personal computer’s harddrive path is
C:\Program Files\RA_Simplification\DMAT\B-Files\4-Controller Logic.
Advertising
This manual is related to the following products: