Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 334
Advertising
334
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Appendix G
Controller, Network, and Device Configuration Without the DMAT Wizard
5.
Enter the desired name for your initial application in the Final Name field.
For the Widg-O-matic application example, the Final Name is P02_Assembly.
6.
Click Tags within the Import Content organizer.
The Configure Tag References dialog box opens.
7.
Replace the _ApplicationName and _MachineName with the desired tag names of your application and
machine.
Advertising
This manual is related to the following products: