Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 61)

Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013 61
System Layout and Wiring Chapter 3
Edit System Communication Drawings
1. Open the communication drawing for your application.
For the Widg-O-matic machine application example, the 060_120_Ethernet_Communication.dwg file is
opened.
2. Delete network devices not used in the project.
For the Widg-O-matic machine application example, one of the Kinetix 300 drives and associated cable is
deleted.
Ethernet Communication
Select and
delete
this drive
and cable.