Create a new rslinx enterprise configuration – Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 150
150
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Chapter 6
System Commissioning
Configure and Download FactoryTalk Project to PanelView Plus Terminal
Create a New RSLinx Enterprise Configuration
In this example, we use RSLinx Enterprise software to configure communication between your personal
computer and/or PanelView Plus terminal and your system’s Logix5000 controller.
Follow these steps to create a New RSLinx Enterprise configuration.
1.
Open your HMI project file in FactoryTalk View Studio software.
2.
Expand RSLinx Enterprise and double-click Communication Setup
The RSLinx Enterprise Configuration Wizard opens.
3.
Select Create a new configuration.
4.
Click Finish.
IMPORTANT
These download steps assume PanelView Plus power and communication wiring is connected, PanelView Plus terminal power is
applied.