Before you begin, What you need, Follow these steps – Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start User Manual
Page 18: Before you begin what you need follow these steps
18
Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Chapter 1
Initial System Configuration Using the DMAT Wizard
Before You Begin
Collect specific application data, for example:
•
System Input Voltage
•
Ambient temperature and Altitude Specifications
•
Transmission Type
•
Motor data
•
Load Data – Inertia and Cycle Profiles
•
Other System Sizing Info
What You Need
•
The Drives and Motion Accelerator Toolkit DVD, publication
. For a copy of the DVD,
contact your local Rockwell Automation distributor or sales representative.
•
PowerFlex Family Selection Guide, publication
•
Kinetix Motion Control Selection Guide, publication
Follow These Steps
Complete the following steps to create a bill of materials and size your drives and motion system components.
Install Other System Selection and
Review Other System Selection and
Start