Rockwell Automation 193 Drives and Motion Accelerator Toolkit Quick Start - Manual (Page 346)

346 Rockwell Automation Publication IASIMP-QS019E-EN-P - August 2013
Appendix G Controller, Network, and Device Configuration Without the DMAT Wizard
4. Select the K300_Drive_Module.L5X program file for your initial Kinetix 300 Ethernet Motion Drive
within your machine.
For the Widg-O-matic application example, K300_Drive_Module.L5X program file was selected as the
only Kinetix 300 drive in the machine.
5. Click Import.
The Import Configuration dialog box opens.
6. Enter the desired name for your initial Device in Final Name field.
For the Widg-O-matic application example, the Final Name is P07_Diverter_Drive.