Metrohm tiamo 2.3 Manual - Manual (Page 1319)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 ￭￭￭￭￭￭￭￭ 1303
User
Short name of the new user that must be used to log in at program start.
After the name has been entered a Start password must be issued with
which the user is entered in the list of users.
Input 24 characters
6.2.1.3.3 Setting a start password
Dialog window: Configuration ▶ Tools ▶ User administration... ▶ [Set start pass-
word] ▶ Start password
A start password can be assigned for the selected user with the button
[Set start password] in the dialog window User administration. It is
active only for newly created users or for those who once again have had
their status set to enabled. The dialog window Start password opens.
Start password
Entry of a new start password. Password options are not used for the start
password.
Input 50 characters
Confirm password
Confirmation of the start password.
Input 50 characters
6.2.2 Security settings
6.2.2.1 Security settings
Dialog window: Configuration ▶ Tools ▶ Security settings
Overview
Parameters for login, password protection, Audit Trail and electronic sig-
natures can be configured in the dialog window Security settings. They
are used primarily to ensure that work is performed in accordance with
the safety requirements contained in FDA Directive 21 CFR Part 11.
Note
The version tiamo light cannot be configured in conformance with
FDA stipulations. With the exception of the parameter Enforce login
with user name on the tab Login/Password protection, all of the
options are inactive (see Chapter 6.2.2.2, page 1304).
With client/server systems the security settings are globally valid for all
connected clients.