Metrohm tiamo 2.3 Manual - Manual (Page 1633)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 9 How to proceed?
tiamo 2.3 ￭￭￭￭￭￭￭￭ 1617
Note
The text files generated by archiving are no longer protected and
can be manipulated. If you want to ensure that these files are
archived in an unaltered condition you must use a suitable external
backup or archiving program.
9.3 Determinations
9.3.1 Starting single determination
How to proceed?
Single determination without statistics
1 Select program part Workplace.
2 In the Run subwindow, select the Single determination tab.
3 If desired, enter Determination parameters.
4 In the Method list box select the method to be used for carrying out
the determination.
The subwindow Method shows the method loaded.
5 If a method was loaded in which the check box Statistics in the
START command is enabled, disable the check box Statistics on
the tab Single determination.
6 Enter sample data.
7 Click on [Start].
The single determination will be started. The subwindow Method
shows active tracks and commands, the subwindow Live display
live curves, measured values and messages.
Single determination with statistics
1 Select program part Workplace.
2 In the Run subwindow, select the Single determination tab.