Metrohm tiamo 2.3 Manual - Manual (Page 448)

5.5 Tracks ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
432 ￭￭￭￭￭￭￭￭ tiamo 2.3
5.5.2.4 Series end track
Subwindow: Method
A series end track is a track that can be created manually with
Paste
▶ New track... ▶ Series end track or with the icon . It starts
with a start command (see Chapter 5.6.2.5, page 451) and finishes with
an end command (see Chapter 5.6.2.8, page 454). Only one series end
track can be inserted per method.
The series end track is executed only once during the run: at the end of
the last determination of a series after the (see Chapter 5.5.2.1, page
429). It can be used, for example, at the end of a series to put Sample
Processors in the desired condition.