Metrohm tiamo 2.3 Manual - Manual (Page 192)

3.7 Subwindow Method ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
176 ￭￭￭￭￭￭￭￭ tiamo 2.3
3.7 Subwindow Method
3.7.1 Method window - General
Subwindow: Workplace ▶ Method
Subwindow Method
The Method subwindow displays the method with its tracks and com-
mands that is loaded in the Run window on the Single determination
or Determination series tab, whereby the display is identical with that
in the method program part. The subwindow can be switched on in the
Workplace program part during the definition of the Layout and thus
made visible. It can be enlarged and reduced as required; it can also be
maximized.
Presentation of the active tracks and commands
Active tracks (tracks with the status BUSY) are marked with a light red
background and active commands (commands in the status BUSY) with a
red frame. If automatic conditioning is switched on, then commands
which are on conditioning will be marked with an orange frame.
3.7.2 Method window - Zoom
Context-sensitive menu item: Zoom
The default presentation of the method in the method window shows all
of the tracks in their entirety. The following zoom levels for the display of
the method can be selected with the context-sensitive menu item Zoom:
Selection 200 %
Zoom in the view to 200%.
Selection 150 %
Zoom in the view to 150%.
Selection 100 %
Set view to 100%.
Selection 75 %
Zoom out the view to 75%.
Selection 50 %
Zoom out the view to 50%.
Selection 25 %
Zoom out the view to 25%.
Selection Fit to width
Adjust to width of the window.