Metrohm tiamo 2.3 Manual - Manual (Page 333)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Database
tiamo 2.3 ￭￭￭￭￭￭￭￭ 317
During recalculation, a progress bar is shown; recalculation can be abor-
ted clicking on next to the progress bar. The results of the recalculation
are added automatically to the subwindow Results view.
This button is inactive until modifications have actually been made. After
the recalculation further data can be modified and then recalculation trig-
gered again.
[Reset]
Reset all modifications made and unsaved during reprocessing to the orig-
inal data and results.
This button is inactive for as long as no modifications have been made or
when the recalculation has not yet been triggered.
[OK]
Close the dialog window Reprocessing. Each determination that has
been modified by reprocessing will be saved as a new version with a ver-
sion number increased by +1.
This button is inactive for as long as reprocessing has not yet been trig-
gered and if not all of the selected determinations could have been recal-
culated.
[Cancel] or
Close the dialog window Reprocessing. The result of the reprocessing
made since the last saving will not be saved.
Note
If the option Comment on modification of determinations is ena-
bled under Configuration
▶ Tools ▶ Security settings ▶ Audit
Trail/Modifications, the dialog window Modification comment
determination is displayed before saving.
4.5.2.6.3 Reprocessing rules
Dialog window: Reprocessing
The following rules apply for reprocessing the selected and modified
determinations:
￭ Number of determinations
No more than 100 determinations (including statistically linked deter-
minations) may be selected for reprocessing.