Metrohm tiamo 2.3 Manual - Manual (Page 730)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
714 ￭￭￭￭￭￭￭￭ tiamo 2.3
Time
Range
0.0 ... 999999.9 s
Volume
Range
0.00000 ... 9999.99 mL
5.6.3.4.4 SET U
5.6.3.4.4.1 SET U - Overview
Dialog window: Dialog window ▶ SET U ▶ Properties... ▶ SET U - 'Command
name'
Command for Set endpoint titrations with potentiometric voltage
measurement.
Instruments
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 857, 888, 901, 902, 904, 905,
906, 907
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 785, 794, 798,
799
Robotic Titrosampler: 855
Appearance
The command has the following appearance:
without conditioning with conditioning
Parameters
The parameters for the command SET U are configured in the following 8
tabs:
￭ General/Hardware
Parameters for devices, dosing devices, sensors and stirrers.
￭ Start conditions
Parameters for the measurement of the initial measured value and for
defining the conditions which have to be met at the start of the titra-
tion.
￭ Control parameters
Control parameters for endpoint 1 and endpoint 2 (measured values
for the endpoints, titration rate, user defined parameters, stop crite-
rion).