Metrohm tiamo 2.3 Manual - Manual (Page 1457)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 ￭￭￭￭￭￭￭￭ 1441
Warning limits for global variable
on | off (Default value: off)
If this option is enabled then the values of the global variables will be
shown in orange if these limits are exceeded.
Lower limit
Lower warning limit for global variable.
Range -1.0 E+99 ... 1.0E+99 (max. 10 digits)
Upper limit
Upper warning limit for global variable.
Range -1.0 E+99 ... 1.0E+99 (max. 10 digits)
Intervention limits for global variable
on | off (Default value: off)
If this option is enabled then the values of the global variables will be
shown in red if these limits are exceeded.
Lower limit
Lower warning limit for global variable.
Range -1.0 E+99 ... 1.0E+99 (max. 10 digits)
Upper limit
Upper warning limit for global variable.
Range -1.0 E+99 ... 1.0E+99 (max. 10 digits)
6.11 Subwindow Sample solutions (TC conductivity)
6.11.1 Sample solutions (TC conductivity) - General
Subwindow: Configuration ▶ Sample solutions (TC conductivity)
Subwindow Sample solutions (TC conductivity)
In the subwindow Sample solutions (TC conductivity), the data for
the calculation of the temperature coefficients of a sample solution is dis-
played in tabular form via Chebyshev function. It can be shown in a sepa-
rate window in the program part Configuration as a part of the Configu-
ration view or (if not present on the desktop) with View
▶ Quick access.
The subwindow can be enlarged and reduced as required; it can also be
maximized.