Metrohm tiamo 2.3 Manual - Manual (Page 161)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.3 ￭￭￭￭￭￭￭￭ 145
If the option Comment on modification of sample data (live) is ena-
bled in the security settings, then this window must be opened before
saving. A reason and a comment on the modification must be entered
here (see Chapter 6.2.2.4, page 1309).
Reason
Selection from the standard reasons for the category Modifications of
sample data (see Chapter 6.2.2.6, page 1311) that are defined in the
security settings.
Selection Selection from default reasons
Comment
Entry of remarks about the modifications to the sample data.
Input 1000 characters
3.6.4 Determination series
3.6.4.1 Determination series - Overview
Tab: Workplace ▶ Run ▶ Determination series
Parameters and sample data for determination series can be edited and
run functions can be triggered on the tab Determination series in the
subwindow Run. It contains the following tools and functions:
￭ Operating elements
Buttons for starting, stopping, interrupting and resuming determina-
tions and series.
￭ Status display
Displaying the current status of the workplace.
￭ Sample data
Entry of sample data for the next determinations.
￭ Properties
Definition of the properties for the tab Determination series.
3.6.4.2 Determination series - Operating elements
Tab: Workplace ▶ Run ▶ Determination series
The following operating elements are located on the tab Determination
series:
Start series (Shortcut: Ctrl G)
Start of the first determination of a sample series. The button is present in
the status READY (no determination started). If the start can be triggered,
then it will be green, otherwise light gray. Conditioning will be started first