Metrohm tiamo 2.3 Manual - Manual (Page 306)

4.4 Templates ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
290 ￭￭￭￭￭￭￭￭ tiamo 2.3
– <remoteType> ... </remote-
Type> Type of Remote Box.
– <multiPortValvePortName> ...
</multiPortValvePortName> Name of the multi-port valve.
– <multiPortValveType> ... </
multiPortValveType> Type of the multi-port valve.
– <multiPortValveSerial> ... </
multiPortValveSerial> Serial number of the multi-port valve.
</Port>
</devicePorts>
</Device>
</usedDevices>
4.4.4.3.10 XML export - Sensor data
XML export
– <usedSensors dynamic=""> Sensor data
– <Sensor> Data on sensor.
<subtype val="" /> Type of the sensor:
XML_SENSOR_OTHER = Other sensor
XML_SENSOR_PH = pH sensor
XML_SENSOR_ION = ISE sensor
XML_SENSOR_METAL = Metal sensor
XML_SENSOR_TEMP = Temperature sensor
XML_SENSOR_COND = Conductivity sensor
– <measInput> Data on measuring input.
<adcInputName val="" /> Number of measuring input.
<adcType val="" /> Type of analog/digital converter.
<adcSerial val="" /> Serial number of measuring input.
<tempSensorType val="" /> Type of temperature sensor (Pt 1000 or NTC).
<tempSensorValue25 val="" /> Nominal resistance of connected NTC sensor.
<tempSensorSlope val="" /> Material constant of the NTC resistance referred to meas-
uring the resistance at 25 °C and 50 °C.
</measInput>
– <sensorData> Data on sensor.