Candle KLVHSKONCT GC32-9172-00 - Manual (Page 198)

198 Candle Products Messages Manual (KLVHS–KONCT)
KMC0252E The heartbeat interval @1 is larger than disconnect interval @2 .
Explanation: You specified a heartbeat interval for the channel which is larger
than the channel’s disconnect interval.
User Response: Correct either the heartbeat interval, or the disconnect
interval. IBM recommends that you should set the heartbeat interval to be
significantly less than the disconnect interval.
KMC0253E Sender/Server channel does not contain a reference to a transmit queue.
Explanation: You defined a sender or server channel, but the Transmit queue
name is not specified. This is required.
User Response: Specify the name of a local queue defined within this Queue
Manager which is defined with Usage=Transmit for the Transmit queue name.
KMC0254E The channel references a transmit queue @1 which is not not defined as
a local queue within the Queue Manager.
Explanation: You defined a transmit queue in the channel definition. However,
the queue name that you specified is not defined as a local queue within the
Queue Manager’s subordinate resources.
User Response: Ensure that the name you specify as a transmit queue for the
channel is defined as a local queue within the Queue Manager.
KMC0255E The channel references a transmit queue @1 which is not not defined as
USAGE(XMITQ).
Explanation: You defined a transmit queue in the channel definition. However,
the queue name that you specified identifies a local queue that is defined with
Usage Normal.
User Response: Change the Usage for the transmit queue to Transmit, or
identify a different transmit queue for the remote queue.
KMC0256E The maximum message length of the transmit queue @1 exceeds the
maximum message length of the channel.
Explanation: You have defined a sender or server channel and its associated
transmit queue. However, the maximum message of the transmit queue is larger
than the maximum message length of the channel. This could result in problems if
messages are put to the transmission queue which are larger than the maximum
message length for the channel.
User Response: Specify a maximum message length for the channel which is
at least as large as the maximum message length for the transmit queue.
KMC0257W The connected Queue Manager @1 does not exist.
Explanation: You defined a value for the Connected Queue Manager on the
Transmit page for this channel. However, the Connected Queue Manager does
not identify a defined Queue Manager within the configuration.
User Response: Either blank out the Connected Queue Manager field, or
specify the name of a Queue Manager which is currently defined.