Candle KLVHSKONCT GC32-9172-00 - Manual (Page 336)

336 Candle Products Messages Manual (KLVHS–KONCT)
KN3CV011 USER COMMANDS UPDATED
Explanation: The user added, changed or deleted a user VTAM command.
System Action: The user commands update successfully.
User Response: None.
Message Type:
Confirmation.
KN3CV012 TYPE A “/” NEXT TO THE DESIRED SELECTIONS
Explanation: The action bar Action pulldown panel allows the user to select one
or more selections by entering the / character.
System Action: None.
User Response: Type a / next to the desired selections and press Enter.
Message Type:
User input error.
KN3CV013 SELECTION NOT AVAILABLE
Explanation: The menu selection is unavailable due to the current state of the
application.
System Action: None.
User Response: Make another selection.
Message Type:
Warning.
KN3CV014 MUST BE Y OR N
Explanation: The input field accepts only Y or N (for Yes or No).
System Action: None.
User Response: Enter Y or N in the field.
Message Type:
User input error.
KN3CV015 FIELD VALUE NOT VALID
Explanation: The data entered in this field is not valid.
System Action: None.
User Response: Press F1 for additional help on the field. Enter a valid value.
Message Type:
User input error.
KN3CV016 COLLECTION INTERVAL TIMEOUT; DATA REINITIALIZED
Explanation: The interval between data requests cannot exceed 5 minutes.
System Action: A new collection interval is initiated, and all current values are
reset to zero.
User Response: None.
Message Type:
Information.
KN3CV017 INTERNAL MVS COUNTER WRAPPED; DATA REINITIALIZED
Explanation: A reset condition has been detected for an MVS internal counter.
System Action: A new collection interval is initiated, and all current values are
reset to zero.
User Response: None.
Message Type:
Information.