Candle KLVHSKONCT GC32-9172-00 - Manual (Page 335)

KMQxx001E–KOCJ0046 335
by an adjacent plus (+) sign. When the input field is not promptable, you must
type the requested data.
System Action: None.
User Response: Enter the requested data.
Message Type:
User input error.
KN3CV007 MUST BE EQ, NE, LT, LE, GT, or GE
Explanation: An invalid Operator was entered in response to a View Some
popup.
System Action: None.
User Response: Place the cursor in the operator field and press the prompt
(F4) key to obtain a list of valid operators. Tab to the desired operator and press
Enter.
Message Type:
User input error.
KN3CV008 MUST BE NUMERIC
Explanation: A non-numeric value was entered in a field that requires a
numeric value.
System Action: None.
User Response: Enter a numeric value in the field.
Message Type:
User input error.
KN3CV009 INVALID SELECTION
Explanation: An attempt to select an item from a menu was made; the number
or mnemonic that was entered is not on the menu, or the cursor is not positioned
to the left of a valid selection.
System Action: None.
User Response: Retype the selection character, or place the cursor to the left of
a valid selection and press Enter.
Message Type:
User input error.
KN3CV010 SAMPLING INTERVAL WAS TOO LONG, TRY AGAIN
Explanation: The sampling interval used for calculating PIU rates is measured
from one panel refresh to the next panel refresh, with 30 seconds being the
maximum sample interval. The interval between presses of the Enter or F5 key
exceeded 30 seconds.
System Action: When the system detects that the maximum sample interval
has been exceeded, it issues this message and a new sampling interval is started.
Elapsed time in the interval is reset to zero.
User Response: Press the Enter key any time within the next 30 seconds to
display the current PIU rate.
Message Type:
Information.