Candle KLVHSKONCT GC32-9172-00 - Manual (Page 251)

KMQxx001E–KOCJ0046 251
KMQMH102E MQIMONITOR(cms_address_space) UNABLE TO ESTABLISH ESTAE,
RC=rc
Explanation: MQI hook failed to establish recovery environment in the specified
CMS address space which installed the MQI hook.
System Action: MQI hook disables itself.
User Response: Contact Candle Customer Support.
KMQMH103E MQIMONITOR(cms_address_space) ALESERV FAILED, RC=rc
Explanation: MQI hook failed when establishing addressability to the specified
Candle Management Server address space. This message can be ignored since
control is returned back to the MQSeries address space.
System Action: MQI hook disables itself.
User Response: Check if the specified Candle Management Server address
space is still running. If it is not running, analyze why it stopped. If it is running,
contact Candle Customer Support.
KMQMH104E MQIMONITOR(mq_monitoring_agent_address_space) INSUFFICIENT
DATA SPACE STORAGE
Explanation: MQI hook detected that there is insufficient data space to hold
MQI data.
System Action: MQI hook disables itself.
User Response: Check if the specified MQ Monitoring Agent address space is
running without problems. If the RKLVLOG indicates abends or other error
messages in the MQ Monitoring Agent address space, analyze these errors. Modify
the agents’s monitoring file so that the SET MQIMONITOR command specifies a
larger BUFFERSIZE. Restart the OMEGAMON Monitoring Agent for WebSphere
MQ.
KMQMH110E MQIMONITOR(cms_address_space) SDUMPX FAILED, RC=rc
Explanation: MQI hook failed to produce diagnostic dump for the specified
CMS address space which installed the MQI hook.
System Action: Diagnostic dump is not produced, MQI hook disables itself.
User Response: Contact Candle Customer Support.
KMQMH112E MQIMONITOR(cms_address_space) DATA SPACE UNECTEDLY
DELETED
Explanation: MQI hook abended and the recovery routine detected that the
data space for communicating with the Candle Management Server address
space was deleted.
System Action: Diagnostic dump is not produced, MQI hook disables itself.
User Response: Check if the specified Candle Management Server address
space is running without problems. If the RKLVLOG indicates abends or other
error messages in the Candle Management Server address space, analyze these
errors. If the problem persists, contact Candle Customer Support.