Candle KLVHSKONCT GC32-9172-00 User Manual
Page 209
KM2EXPFF–KMCRCA002I
209
KMC0334E
Invalid volume
@2
for Tandem NSK.
Explanation: You specified an invalid volume for the Queue Manager.
User Response: Specify a valid volume. Specify a valid Tandem NSK volume.
KMC0335E
Invalid TS/MP PATHMON process name
@2
for Tandem NSK.
Explanation: You specified an invalid process name for the Queue Manager.
User Response: Specify a valid Tandem NSK TS/MP PATHMON process
name.
KMC0336E
Invalid home terminal name
@2
for Tandem NSK.
Explanation: You specified an invalid home terminal name for the Queue
Manager.
User Response: Specify a valid Tandem NSK home terminal name.
KMC0337E
Invalid MQSeries Status Server process name
@2
for Tandem NSK.
Explanation: You specified an invalid MQSS server for the Queue Manager.
User Response: Specify a valid Tandem NSK MQSeries Status Server process
name.
KMC0338E
Invalid local queue definition - cluster queue cannot be a transmit queue.
Explanation: You defined a local or model queue containing a reference to a
cluster, but the queue is also defined with Usage=Transmit. This is not supported.
User Response: Either remove the cluster or cluster namelist reference from the
local queue definition, or change the Usage of the queue to Normal.
KMC0339W
The corresponding receiver channel is not associated with the sender
channel’s cluster set.
Explanation: You have defined a cluster sender channel and associated the
channel with one or more cluster names. However, at least one of the cluster
names is not associated with the corresponding cluster receiver channel.
User Response: Modify the definition of the cluster sender and cluster receiver
channels so that each cluster associated with sender channel is also associated
with the receiver channel.
KMC0340W
A cluster receiver channel corresponding to this cluster sender is not
defined on another Queue Manager.
Explanation: You have defined a cluster sender channel; however, there is no
corresponding cluster receiver channel on any other Queue Manager in the
configuration with a matching name.
User Response: You can either rename the cluster sender channel to have the
same name as the cluster receiver on the Queue Manager you wish the sender to
connect to; or you can define a cluster receiver channel with the same name on
the connected Queue Manager.