Candle KLVHSKONCT GC32-9172-00 - Manual (Page 354)

354 Candle Products Messages Manual (KLVHS–KONCT)
KN3CV125 THE CATEGORIES SELECTION IS ONLY VALID FOR THE IO00 BUFFER
POOL
Explanation: When accessing a buffer pool display, the G (Categories) action
was requested.
System Action: None.
User Response: The G action code is only valid for the IO00 buffer pool.
Choose one of the other action codes listed.
Message Type:
User input error.
KN3CV126 THE DATA FOR THE table tablename IS NOT AVAILABLE IN THIS
DOMAIN.
Explanation: The PLU is a cross-domain resource (CDRSC) and the COSTAB
resides in the other domain, or the SLU is a CDRSC and the USSTAB resides in
the other domain. The name of the COSTAB displays, but the name of the
USSTAB is unavailable. The requested table is available in the other domain.
System Action: None.
User Response: Press Enter to continue. To view the table, log onto the
OMEGAMON II that monitors the other domain.
Message Type:
Information.
KN3CV127 VALID RANGE IS 0–100
Explanation: The entry field requires a percentage and the value is out of range.
System Action: None.
User Response: Specify a number that is not less than zero and is not greater
than 100.
Message Type:
User input error.
KN3CV128 VALID RANGE IS 15–360
Explanation: The trend recording interval must be in the range of 15–360
minutes.
System Action: None.
User Response: Specify a number that is not less than 15 and is not greater
than 360.
Message Type:
User input error.
KN3CV129 VALID RANGE IS 1–120
Explanation: The number of hours of trend or exception records to display must
be 1–120.
System Action: None.
User Response: Specify a number that is not less than 1 and is not greater than
120.
Message Type:
User input error.