Candle KLVHSKONCT GC32-9172-00 User Manual
Page 69
KLVHS001–KLVSC009
69
System Action: One of the following:
®
Action 1.
Error recovery displays the TERMINAL INPUT ERROR message on
the terminal. The input message is rejected with an appropriate sense code
and normal processing resumes.
®
Action 2.
Error recovery ignores the input message and normal processing
resumes.
User Response: One of the following:
®
If the TERMINAL INPUT ERROR message displays, press ENTER to remove
the message and continue normal operation. If the problem persists, the
system administrator should obtain a VSSTRACE of the failure and a copy of
any related error messages and contact Candle Customer Support.
®
If the TERMINAL INPUT ERROR message displays, press ENTER to remove
the message and continue normal operation. If the problem persists, the
system administrator should analyze the failure and contact the appropriate
hardware or software vendor.
Message Type:
INFO.
KLVPM051
KLVINPSM RKANPAR PARAMETERS:
Explanation: Module KLVINPSM logs its start-up parameters as they are read
from RKANPAR. This is the header message and will be followed by message
KLVPM052.
System Action: None.
User Response: None.
Message Type:
LOG.
090E
Internal Exception Condition
2
1
090F
Internal Exception Condition
2
1
0910
Internal Exception Condition
2
1
0911
Internal Exception Condition
2
1
0912
Internal Exception Condition
2
1
0913
Unexpected formatted input (error_data=buffer
address)
2
2
0914
Input data from unknown field
(error_data=buffer address)
2
2
0915
Attention key received during pre-popup read.
2
2
0916
Read modified already satisfied.
2
2
Table 1. Description of reason codes for KLVPM021
Reason
Code
Description
System
Action
User
Response