Candle KLVHSKONCT GC32-9172-00 - Manual (Page 45)

KLVHS001–KLVSC009 45
KLVOP165 CLOSE COMPLETE: APPLID(applid)
Explanation: The CLOSE command was issued against applid and completed
successfully.
System Action: None.
User Response: None.
Message Type:
REPLY.
KLVOP182 EMULATION SESSION NOT AVAILABLE: STATUS(sense)
Explanation: A virtual session specified in the EMLU3767 command was not
available to service the request.
System Action: The command fails.
User Response: Refer to the
"CT/Engine Message Route Codes" appendix for
the format of the STATUS (sense) field to determine the correct action to take.
Look for other error messages referring to the virtual pool associated with this
request.
Message Type:
ERROR.
KLVOP183 EMULATION SESSION STARTED
Explanation: The emulation session specified in the EMLU3767 command was
started successfully.
System Action: None.
User Response: None.
Message Type:
REPLY.
KLVOP184 INVALID SEND STATUS: R1(hex)
Explanation: CT/Engine returned an invalid send status for the EMLU3767
command.
System Action: None.
User Response: Use IBM’s ACF/VTAM Programming and the R1 field to
determine the cause of the error and take appropriate corrective action. The
format of the R1 field is explained in the
"CT/Engine Message Route Codes"
appendix.
Message Type:
ERROR.
KLVOP185 EMULATION SESSION ENDED
Explanation: The emulation session started via the EMLU3767 command has
ended.
System Action: None.
User Response: None.
Message Type:
REPLY.
KLVOP186 UNABLE TO ACQUIRE VIRTUAL SESSION WITH applid SENSE(sense)
Explanation: The virtual session with applid specified by the EMLU3767
command could not be established.
System Action: None.
User Response: The format of the SENSE field is explained the
"CT/Engine
Message Route Codes" appendix, which explains the cause of the error.
Message Type: ERROR.