Candle KLVHSKONCT GC32-9172-00 - Manual (Page 246)

246 Candle Products Messages Manual (KLVHS–KONCT)
6.SET MANAGER BLOCK IS NOT ACTIVE
7.SET MANAGER BLOCK HAS AFFINITY TO A DIFFERENT SYSTEM
8.MQSERIES VERSION IS NOT SUPPORTED
9.MONITORING FAILED
10.:OF UNDETERMINED REASON
System Action: None.
User Response: Depending on the reason, do one of the following:
® For reasons 1, 6, 7, issue the corrected SET MANAGER command.
® For reasons 2 and 3, no response is necessary.
® For reasons 4, 5, 8, and 9, contact Candle Customer Support.
® For reason 10, reissue the DISPLAY SETTINGS command. This reason may
occur during the transition from one state to another.
KMQCI316I MQ MANAGER (manager_name) IS NOT ACTIVE
Explanation: This message is issued in response to the DISPLAY SETTINGS
command if the manager_name for the specified queue manager is not active.
System Action: None.
User Response: None. This is an informational message only.
KMQCI317W REMOTE MQ MANAGER manager_name SET NOT FOUND
Explanation: The KMQCMD DISPLAY SETTINGS could not find remote
manager manager_name given in the RMGRNAME parameter. A SET
RMANAGER command has not been issued for this remote manager.
System Action: None.
User Response: None.
KMQCI318W REMOTE MQ MANAGER manager_name IS NOT MONITORED BECAUSE
reason_text
Explanation: This message is issued in response to the DISPLAY SETTINGS
command when a remote manager which has been specified for monitoring via a
SET RMANAGER command, is not being monitored because of the given reason.
The reason_text can be one of the following:
1.NO SET MANAGER BLOCK WAS FOUND
2.MONITORING IS INITIALIZING
3.MONITORING IS BEING TERMINATED
4.INVALID SET MANAGER BLOCK WAS FOUND
5.SET MANAGER BLOCK WAS IN USE
6.SET MANAGER BLOCK IS NOT ACTIVE
7.SET MANAGER BLOCK HAS AFFINITY TO A DIFFERENT SYSTEM
8.MQSERIES VERSION IS NOT SUPPORTED
9.MONITORING FAILED
10.OF UNDETERMINED REASON
System Action: None.