Candle KLVHSKONCT GC32-9172-00 - Manual (Page 99)

KLVSD001–KLXOP005 99
KLVST024 FREE STORAGE LIST UNAVAILABLE
Explanation: CT/Engine was unable to allocate the free storage list because the
MINIMUM parameter is too small.
System Action: CT/Engine terminates.
User Response: Adjust the storage allocation parameters and retry.
Message Type:
ALERT.
KLVST025 UNABLE TO IDENTIFY SUBTASK ENTRYPOINT
Explanation: The OS IDENTIFY macro issued to identify an entry point to
initialize the CT/Engine dispatcher did not complete successfully.
System Action: CT/Engine terminates.
User Response: Contact Candle Customer Support.
Message Type:
ALERT.
KLVST026 modname concat [address] module info
| TRANSIENT | ALREADY RESIDENT | RELOCATION ERROR | BLDL
ERROR [COMMAND=cmd | RESIDENT] | [CLASS=class[,DEFERRED]]
Explanation: During CT/Engine start-up, this message displays the attributes
and status of each module in the CT/Engine load library. Fields of interest are the
module name modname, the relative concatenation number concat, and the
module information field module info. TRANSIENT refers to modules that are not
loaded at this time. DEFERRED refers to modules that are not considered to be
transient but will be loaded at a later time. Any errors detected are also displayed
as ALREADY RESIDENT|RELOCATION ERROR|BLDL ERROR.
System Action: None.
User Response: None, unless error messages ALREADY
RESIDENT|RELOCATION ERROR|BLDL ERROR are displayed. If the cause of
the error cannot be attributed to a user modification, contact Candle Customer
Support.
Message Type:
LOG.
KLVST027 REQUIRED POINTER(S) NOT RESOLVED, hex IS THE OFFSET
Explanation: One of the pointers required for CT/Engine execution could not be
resolved, probably due to a module that is missing from the CT/Engine load
library.
System Action: CT/Engine terminates.
User Response: Cross reference all the modules in the execution library with
the modules in the distribution library to determine if a module is missing. If the
error cannot be attributed to an installation error, contact Candle Customer
Support with the hex value.
Message Type:
ALERT.